BCHCD - BULLET MASTER LUBE, 47A DRY FILM LUBRICANT

  • MSDS: BCHCD
  • Manufacturer: SANDSTROM PRODUCTS COMPANY
  • Product Name: BULLET MASTER LUBE, 47A DRY FILM LUBRICANT
  • National Stock Number: 9150-00N001128
Product Identification

Product ID:BULLET MASTER LUBE, 47A DRY FILM LUBRICANT
MSDS Date:01/01/1985
FSC:9150
NIIN:00N001128
MSDS Number: BCHCD

Responsible Party
SANDSTROM PRODUCTS COMPANY
224 SOUTH MAIN STREET
PORT BYRON, IL 61275-9501
US

Emergency Phone: 309-523-2121

Info Phone: 309-523-2121

Cage: 34227

Contractor
SANDSTROM PRODUCTS COMPANY
PORT BYRON, IL 61275 US

Telephone: 309-523-2121

Cage: 34227

Ingredients

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 1.1%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHYLENE DICHLORIDE (SARA III)

CAS: 107-06-2

RTECS: KI0525000

Fraction By Weight: 2.1%

OSHA PEL 50 PPM/C,100PPM

ACGIH TLV: 10 PPM; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 19.3%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


1,4-DIOXANE (DIETHYLENE DIOXIDE) (SARA III)

CAS: 123-91-1

RTECS: JG8225000

Fraction By Weight: 22.9%

OSHA PEL S, 100 PPM

ACGIH TLV: S, 25 PPM; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


LEAD MONOXIDE (LEAD OXIDE YELLOW)

CAS: 1317-36-8

RTECS: OG1750000

Fraction By Weight: 2.1%

OSHA PEL 0.05 MG/M3 (PB)

ACGIH TLV: 0.15 MG/M3(PB); 8990

Hazards

Effects of Overexposure:INHAL OF HIGH VAPOR CONC:RANGES FROM MILD
DEPRESSION TO CONVULSION & LOSS OF CONSCIOUSNESS.

First Aid

First Aid:IF OVER COME BY VAPOR, REMOVE FROM EXPOS IMMED-CALL MD. IF
SWALLOWED-CALL MD FOR INSTR. IF BREATHING IS IRREG OR STOPPED,
START RESUS, ADMIN O*2. REMOVE CONTAM CLOTH & WASH SKIN W/SOAP &
WATER. FLSUH EYES W/WATER UNTIL IRRIT SUBSIDES.

Fire Fighting

Flash Point:43F (PMCC)
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE
Fire Fighting Procedures:AIR SUPPLIED EQUIP FOR ENCLOSED AREAS. SEE
SUPP DATA
Unusual Fire/Explosion Hazard:DO NOT STORE OR MIX W/ STRONG OXIDANTS

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. KEEP PEOPLE AWAY.
REMOVE FREE LIQUID. ADD ABSORBENT TO SPILL AREA. AVOID BREATHING
VAPORS. VENTILATE ENCLOSED SPACES. OPEN ALL WINDOWS & DOORS.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED.KEEP AWAY FROM
HEAT, SPARKS AND OPEN FLAME.
Other Precautions:AVOID PROLONED OR REPEATED CONTACT W/SKIN. REMOVE
CONTAMINATED CLOTHING. VASH SKIN W/SOAP & WATER AFTER CONTACT.

Exposure Controls

Respiratory Protection:ORGANIC VAPOR CANISTER OR SUPPLIED-AIR HOSE MASK
(NIOSH/MSHA APPRVD)
Ventilation:EXPLOSION PROOF VENTILATION EQUIP. USE ONLY W OUTDOOR VENT
Protective Gloves:RUBBER
Eye Protection:MONOGOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health
VAPOR PRESS MEAS AT 20C W/ RESPECT TO METHYLENE CHLORIDE. SPECL FIRE
FIGHT PROC: COOL EXPOSED CONTAINERS W/WATER. ADD INGRED: ETHYL ALCH
(1.1%, TLV: 1000PPM), METH CHLOR (18.3%, TLV: 100 PPM)

Chemical Properties

Boiling Pt:B.P. Text:101-275F
Vapor Pres:340
Vapor Density:>1.0
Evaporation Rate & Reference:SLOWER THAN ETHER.
Percent Volatiles by Volume:80

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:KEEP OUT OF WATERWAYS. INCINERATE ABSORBED
MATERIAL. DISPOSE IAW LOCAL,STATE & FED CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.